BDF S05 Heat Control Daytime Privacy One Way Mirror Window Film Silver 5 (36in X 12ft)
(as of [price_update_date] – Details)
BDF S05, Silver 5 Daytime Privacy One Way Mirror window film provides excellent daytime privacy with its highly reflective silver finish. Its one-way mirror quality greatly depends on the lighting conditions, working to give intended privacy during the daytime only when the sunlight makes the outside much brighter than the inside. The mirror-effect will be reversed at night since the inside will be brighter than the outside if you have lights on in your house. The One Way Mirror film is extra dark and very reflective and helps reduce cooling costs during the summer season.
BDF S05’s silver-tone metalized reflective nature gives an excellent heat-rejecting rate of up to 80% that keeps the interior of your home or office building nice and cool. The number “05” in its name refers to the fact that it is rated to transmit about 12% of visible light. By maintaining your room at a cool, moderate temperature, resulting in lower cooling costs, you can promote a more environmentally aware lifestyle by reducing energy usage and help create a greener world.
Because of the dark and high reflective tint that was described above, the film provides an excellent method of promoting daytime privacy. Even though the film allows light to pass through, the reflectiveness makes it difficult for unwanted eyes to see what’s happening inside. Daytime privacy means it will provide you perfect privacy until sunset time. Due to its dark property, it will only give very limited privacy during the nighttime.
The effect of any reflective, privacy-enhancing window film will greatly depend on the lighting conditions because the side exposed to more light will become more reflective and harder to see through. This is why the privacy-effect works so well during the day, and almost not at all at night since the sun usually makes the exterior of your building much, much brighter than the interior. The use of curtains or blinds will be needed for night-time privacy.
Good for homes and office buildings that are directly exposed to the sun which is the source of the UV rays, S05 silver reflective window film provides an excellent UV blocking barrier. Being exposed to UV rays can cause skin problems such as premature aging skin and signs of wrinkles and as well as eye problems. This BDF S05 film rejects about 99% of the UV rays, helping to reduce fading on your precious furniture, pictures or other UV sensitive belongings.
More and more dual-pane windows are installed in the houses around our neighbors. BDF S05 film is the perfect solution for the dual-panes windows when properly installed on the window. Due to the nature of its property, BDF S05 film reflects most of the solar heat rather than holding on to it. By reflecting the solar heat, BDF S05 will keep the window cool and stable. This will keep your home much cooler as it reduces the heat stored within the window.
Our products come with the tools needed to get your job done and an installation guide is included to help you with a smooth installation process. With the right amount of care, practice, and patience, both installation and removal of the film should be simple and easy. Whether your windows are small, big, wide, or narrow, our products come in a variety of sizes to suit your individual needs. It is usually recommended and necessary that you have more than enough film to cover the window.
CLEANING THE WINODWS.
It is best to clean the window with a window scraper before any installation. Using the window scraper and soapy solution all over the window will clean it of any caked-on dirt that wiping will not remove. You can use the installation solution to also clean the window as well as any non-ammonia-based cleaners. It is recommended to clean the surrounding area of the glass, like the frame and seals before installation too. Using a no lint or low lint cloth will ensure the glass will be free of any dust.
REMOVING THE BACKING LINER .
Attach one piece of tape to a corner of the film. Then use another tape of the other side of the same corner. Both tapes should be placed slightly offset. Hold onto the two over hanging tapes and press them together to grab the film’s corner tip firmly. Then slowly separate the two pieces of tape; the liner and film should separate.
As you gently pull the liner away, spray on the exposed adhesive side. This will prevent the film from sticking to itself or to any thing else.
WETTING THE FILM & WINDOW.
Spray, spray, and spray more! You need to spray a lot and make the film fully wet and almost flooded on the film and the window glass surface. Please remember that the fully wet window and the film is one of the key factors for your successful installation without bubbles. To handle the film easier when separating the film and the liner, spraying soapy water liberally on the exposed adhesive side as you pull off the liner This will eliminating potential wrinkles and bubbles during or after installation.
REMOVING THE FILM WHEN NEEDED.
The static cling film doesn’t have the adhesive and can be removed by hand.
Other installed adhesive window film can be removed even after years. You need to soften the cured or hardened adhesive of the film to remove the film. A fabric steamer or a heat gun can heat up the film and loosen the adhesive. Using a hairdryer can heat up the film to loosen the adhesive, but it will take longer. If there is remaining adhesive residue, it can be removed with soapy water and a razor blade.
EXCELLENT DAYTIME PRIVACY. Provides great intended privacy during daytime only; the mirror-effect is reversed at night since the interior will be exposed to more light than the exterior. The side with the most light will have the mirror-like appearance.
EXTRA DARK AND REFLECTIVE to create a mirror-like appearance while reducing cooling costs during the summer through effective Heat Rejection. VISIBLE LIGHT TRANSMITTANCE / VLT : 10%. ( 5% = Very Dark. 15% = Dark. 35% = Lightly Dark. 50% = Light. 65% = Very Light)
STRONG ADHESIVES to last many years. For easier installation, remember to use A LOT of soap/water mixture to soak both the adhesive side and window.
HIGH QUALITY PERFORMANCE films that are sensitive by nature. Please remember to take caution when handling the film as the slight fold may create a permanent wrinkle.
FREE KNIFE & SQUEEGEE are included in the package.